STRUCTURE: Oversized precision ground, large dual columns; Cross link connecting two columns for enhanced structural strength; Back-tilted saw frame for longer blade life; Hydraulic shuttle vise assembly;
BLADE DRIVE: Specially designed gearbox for high lateral pressure; Inverter controlled infinitely variable blade speed;
BLADE GUIDANCE & LUBRICATION SYSTEM: Carbide blade guides with bearing guides; Two additional guides to support the blade from the top; Automatic hydraulic blade tensioning device; Integral coolant system; Pitch design for coolant drainage; Synchronized power driven blade brush;
CONTROL & AUTOMATION: Smart NC-100 (SNC-100) technology programmable up to 100 different jobs; Automatic kerf compensation & automatic multiple indexing; "Save-a-Blade" design to prevent tooth deformities; Automatic shutdown; Error code display for simplified self-diagnostics; LCD screen with film type keypad, blade speed/life, feed vise position display; Precision feed pressure & feed rate dual valve system; Bundle/single cutting mode switch; Automatic work height selector & air gap eliminator;
MATERIAL FEEDING & CLAMPING; Split vise jaws featuring automatic feeding down to the remnant length of 50mm (2"); Hydraulic front and rear vices; Ductile cast iron vices with replaceable hardened wear plates; Computer controlled multiple indexing up; One set of vertical alignment rollers;
SAFETY: Proximity switch for sensing blade slippage or breakage; Interlock design in an electrical and hydraulic system; Conduits protection measure; "Alert Orange" safety measure;
STANDARD ACCESSORIES: Blade "clip" device for easy blade change; an Adjustable front plate for cut-off stock; Additional flushing hose; Bi-metal saw blade; Built-in work light; Toolbox, levelling pads, and an additional wire brush; Operation & parts manual
Specifications:
C-320 NC |
|||
Capacity |
|
|
|
320 mm |
320 mm |
380x320 mm |
|
Bundle capacity - Width |
190 - 300 mm |
||
Bundle capacity - Height |
70 - 140 mm |
||
Blade speed (m/min.) |
20 - 100 m/min. |
||
Blade dimensions (mm) |
4240 x 34 x 1.1 |
||
Tension |
Idraulic |
||
Motor output - saw blade |
5 HP (3.7 Kw) |
||
Motor output - hydraulic |
1 HP (0.75 Kw) |
||
Motor output - coolant |
1/8 HP (0.1 Kw) |
||
Hydraulic tank |
35 L |
||
Coolant tank |
75 L |
||
Automatic Indexing Length |
Single |
403 mm |
|
Multiple |
max. 9999 mm |
||
Rest Piece |
50 mm |
||
Vise control |
Hydraulic |
||
Height of Work Bed |
790 mm |
||
Weight |
2000/2200 kg |
||
Floor space (mm) |
2010 x 2000 mm |